Apple Power Macintosh 6200 Series - Manual (Page 69)

Initializing an external SCSI hard disk
You initialize an Apple external SCSI hard disk by using a program called
Apple HD SC Setup, which is on the floppy disk labeled Disk Tools that came
with your computer. If your computer came with a CD-ROM drive and you
didn’t receive floppy disks, you can find Apple HD SC Setup on the CD-ROM
disc that contains system software.
1 Start up your computer from the Disk Tools disk or the CD-ROM disc that contains
system software.
See “Starting Up From a CD-ROM Disc” or “Starting Up From a Floppy
Disk” earlier in this section.
2 Open the Apple HD SC Setup icon.
You may need to look in a folder called Utilities to find Apple HD SC Setup.
3 Click Drive until the disk you want to initialize appears.
You cannot initialize the disk that you used to start up your computer or the
disk that contains the Apple HD SC Setup program.
4 Click Initialize.
61 Troubleshooting
SCSI ID number of the currently selected hard disk
Name of the currently selected hard disk