Apple Power Macintosh 6200 Series - Manual (Page 66)

Initializing a hard disk
The hard disk inside your computer was initialized (formatted for use) at the
factory, so you shouldn’t need to initialize it. You need to initialize a hard disk
only if
m you purchase a hard disk that has not been initialized at the factory
m your hard disk is damaged
If a hard disk needs to be initialized, the disk’s icon does not appear on the
desktop when you start up the computer using another disk.
Starting up from a CD-ROM disc
To initialize, test, or repair a hard disk, or to install system software on a hard
disk, you need to start up your computer from another disk. If your computer
has a CD-ROM drive, you can start up your computer using the CD-ROM
disc containing system software that came with the computer.
To start up the computer using the CD-ROM disc, follow these steps:
1 Turn your computer on.
2 Press the Open/Close button on your CD-ROM drive, and quickly insert the CD-ROM disc
containing system software into the drive.
3 Immediately press and hold down the Shift, Option,
x
, and Delete keys on your keyboard
at the same time.
Continue to hold down the keys until you see the “Welcome to Macintosh”
message.
WARNING Initializing a disk erases any information that may be on it.
Before you initialize a damaged disk, try to repair it as described in
“Repairing a Damaged Disk” later in this chapter.
58 Chapter 5