beautypg.com

Installing a communication card – Apple Power Macintosh 6200 Series User Manual

Page 104

background image

4

Press down on the card until the connector is solidly in place.

Don’t force the card. If you meet resistance, pull the card out and try again.
To see if the card is properly connected, lift it gently. If it resists and stays in
place, it’s connected.

Installing a communication card

1

If your communication card has ports for connecting equipment, remove the plastic

access cover from the vertical plate.

2

Remove the communication card from its static-proof bag.

Hold the card by its edges to avoid touching any connectors on the card.

Communication slot

Push the two plastic tabs apart and pull off the
metal retainer so the access cover can come off.

Vertical plate

Metal retainer

96

Appendix B