beautypg.com

Apple PC Compatibility Card (Installation) User Manual

Page 27

background image

To connect another monitor, follow these two steps:

1

Plug the middle connector on the loopback cable into the monitor port on the
PC Compatibility Card and tighten the thumbscrews.

2

Plug the connector on the short end of the cable into the cable for the monitor that you
want to use with the PC environment.

The long connector is only used with other computer models, and should
remain unplugged.

Attach the short
connector on the
loopback cable to the
second monitor’s cable.

The long connector
remains unplugged.

Attach the middle
connector on the
loopback cable to the
26-pin port on the
PC Compatibility Card.

27

Installing the PC Compatibility Card in a 5400 Series Macintosh Computer

See also other documents in the category Apple Computers: