beautypg.com

Apple Power Mac G4 (Gigabit Ethernet) User Manual

Page 70

background image

70

Chapter 4

Installing an AirPort Card

1

Position the AirPort Card with the AirPort ID numbers and bar code facing up and insert the
card into the AirPort Card connector.

2

Carefully attach the coaxial antenna wire to the port on the end of the AirPort Card.

The antenna wire is usually stowed on the side of the PCI card guide. Don’t bend or crimp
the wire tightly.

3

Close the computer.

Plug the antenna wire into the
hole in the end of the AirPort Card.

The antenna wire is stowed here when
not in use.

Insert the AirPort Card– bar code side up– until
it is firmly seated in the connector.

AirPort Card connector

See also other documents in the category Apple Computers: