Apple AirPort Time Capsule 802.11n (4th Generation) - Manual (Page 20)

20 Chapter 2 SettingUpYourTimeCapsule
CreatingaNewWirelessNetwork
You can use the AirPort Utility setup assistant to create a new wireless network. The
setup assistant guides you through the steps necessary to name your network, protect
your network with a password, and set other options.
If you plan to share a USB printer or USB hard disk on your network:
1 Connect the printer or hard disk to the Time Capsule USB (d) port.
2 Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac,
or in Start > All Programs > AirPort on a computer using Windows.
3 Select your Time Capsule and click Continue.
If you don’t see the Time Capsule you want to configure, click Rescan to scan for
available wireless devices, and then select your Time Capsule from the list.
4 Follow the onscreen instructions to create a new network.
ConfiguringandSharingInternetAccess
If you plan to share your Internet connection with wireless-enabled computers on your
network or with computers connected to the Ethernet ports, you need to set up your
Time Capsule as an AirPort base station. After your Time Capsule is set up, computers
access the Internet through the AirPort network. Your Time Capsule connects to the
Internet and transmits information to the computers over the wireless network.
Before you use AirPort Utility to set up your Time Capsule, connect your DSL or cable
modem to the Time Capsule Ethernet WAN (<) port. If you’re connecting your Time
Capsule to an Ethernet network that already has Internet access, connect it to the
Ethernet network.