beautypg.com

Apple Xserve Intel (Late 2006) DIY Procedure for Rear ID Tab User Manual

Page 21

background image

Xserve (Late 2006) Rear ID Tab Replacement Instructions

1

Tighten the five Phillips screws that fasten the airflow duct to the fan array, in the order
shown, to prevent the duct from warping. Do not overtighten the screws.

Replacing the PCI Riser Cards and Expansion Cards

Align the riser with slot 1 on the logic board and press to seat the card.

Tighten the captive screws that secure the riser bracket to the back panel.

Repeat for the riser in slot 2.

3.

1.

2.

3.