Bosch AXXUS WFL 2050 - Manual (Page 17)

17
Soaking
The Soak setting is used to preĆtreat heavily
stained items:
q Load laundry of the same color.
q Add the soaking agent to chamber I according
to the manufacturer's specifications.
q Turn the program selector to Soak.
The ready control light is flashing.
q Press the Start button.
The wash control light comes on, and the
program starts.
i
The soak cycle lasts 2 hours with a maintained
temperature of 60 °F / 15 ° C . It is ended with
a short spin cycle. All the water is pumped out.
Bleaching
WARNING
DO NOT use chlorine bleach in this washing
machine.
Decolorizing
CAUTION
Decolorants may contain sulphur or chlorine.
These substances can cause parts of the washĆ
ing machine to corrode. Do not decolorize items
of laundry in the washing machine.
Changing a program
If you have accidentally selected the wrong
program:
q Turn the program selector to Off.
q Turn the program selector to the desired
program.
The ready control light is flashing.
q Press the Start button.
The wash control light comes on, and the new
program starts.
Cancelling an active program
If you wish to prematurely end a program:
q Turn the program selector to Off.
q Turn the program selector to Drain or Spin.
The ready control light is flashing.
For Spin, select the desired spin speed (but not no
final spin).
q Press the Start button.
The wash control light comes on, and the
program starts.