Apple Power Macintosh 8100 Series - Manual (Page 52)

Two adapters for RCA plugs come with your computer. To connect a cable
with RCA plugs to your computer, connect the RCA plug to one of the
adapters, and connect the adapter to the appropriate S-video port (input or
output) on the back of your computer.
Connect the end marked with the æ icon
to the computer’s S-video input port.
(The flat side of the connector should face up.)
Connect the end marked with the Æ icon
to the computer’s S-video output port.
(The flat side of the connector should face up.)
To view images from your VCR or other
video equipment on your monitor, attach the
end of the adapter marked with the
˜ icon
to a cable with RCA plugs, then connect
the cable’s other RCA plug to the video
output port on the video device.
To record images from your computer on a
VCR or other video equipment, attach the end
of the adapter marked with the
 icon to a
cable with RCA plugs, then connect the
cable’s other RCA plug to the video input
port on the video device.
42 Chapter 3