Apple Power Macintosh 8100 Series - Manual (Page 102)

92 Chapter 5
8 Start up your computer from the Install Disk 1 disk or the CD-ROM disc that contains
system software.
See “Starting Up From a CD-ROM Disc” or “Starting Up From a Floppy
Disk” in the section “Initializing a Hard Disk” earlier in this chapter.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
9 Click OK.
The Easy Install dialog box appears.
10 Make sure that the hard disk named in the box is the one on which you want to install
system software.
If it isn’t, click Switch Disk until the correct disk name appears.
11 Click Install.
12 Follow the instructions that appear on the screen.
If you’re installing system software from floppy disks, you see messages
asking you to insert different disks.
Parts of system
software to be
installed
Disk on which
system software
will be installed
Click here to install the
software you need.
Click here to install on
a different disk.