Apple Macintosh Performa 6300CD Series - Manual (Page 62)

Rebuild your desktop regularly
A process known as “rebuilding the desktop” helps your Macintosh keep
track of data on your disks. It’s a good idea to rebuild the desktop of your
disks once a month or so, especially your startup disks. (Although you usually
use the hard disk in your computer as a startup disk, you can also start up
from any other disk that has system software installed.)
To rebuild the desktop of your internal hard disk disk, follow these steps:
1 Hold down the Option and x keys while you start up your computer.
Do not release the keys until you see a message asking whether you want to
rebuild the desktop.
2 Click OK.
You can also use this procedure to rebuild the desktop of an external hard disk
or a floppy disk. Simply turn on the external hard disk or insert the floppy
disk into a floppy disk drive before you turn on the computer.
If icons do not appear correctly after you rebuild the desktop, restart your
computer while pressing the Shift key to temporarily turn off system
extensions. When you see the “Welcome to Macintosh—extensions off”
message, release the Shift key and press the Option and x keys until you see
a message asking if you want to rebuild the desktop.
52 Chapter 6