Where to connect additional equipment 30, Where to connect additional equipment – Apple Macintosh Performa 6300CD Series User Manual
Page 40
Where to connect additional equipment
The illustration on this page shows where equipment should be connected to
your computer. (These items can be purchased from Apple-authorized dealers.)
For instructions on connecting additional equipment such as a printer or
scanner, see the manual that came with the equipment.
-
Sound output port
W
Modem port
[
Printer port
Connects your Macintosh
to a printer or
LocalTalk network.
V
Apple Desktop
Bus (ADB) port
Connects your
Macintosh to input
equipment, such as a
keyboard or a trackball.
≈
Sound input port
g
SCSI port
Connects your Macintosh to
SCSI equipment, such as external
hard disk drives and scanners.
*
If your computer has an internal modem, this port is covered. Don’t remove the cover or connect anything to this
port if you have an internal modem.
Connects an external
modem to your Macintosh.
*
Connects your Macintosh to
headphones, externally
powered (amplified)
speakers, or other audio
output equipment.
Connects your Macintosh to a
professional-quality microphone
or other audio input equipment.
F
Security lock
port
Standby power button
≤
Power socket
™
Monitor port
Connects your monitor
to your Macintosh.
Internal modem (optional)
You may have an internal
modem or other communication
card installed.
PDS card access cover
Covers port for optional
processor-direct slot (PDS)
expansion card.
Video input card (optional)
Connects your Macintosh to a video camera,
VCR, or other video equipment.
TV tuner card (optional)
Connects your Macintosh
to an external TV antenna
or cable TV service.
®
WARNING
Before you connect any equipment—such as a mouse,
keyboard, or external SCSI device—to your computer, make sure that
your computer is plugged in (in order to ground the computer) and
turned off. If you connect equipment with the computer turned on, you
can damage your computer and your equipment.
30
Chapter 3