Apple Macintosh Performa 6300CD Series - Manual (Page 21)

What’s next?
Congratulations! You’ve finished setting up your computer. Now continue
with one of the following steps:
m If you are new to the Macintosh, turn to the next section, “Learning the
Basics.”
m If you are an experienced Macintosh user, turn to Chapter 2, “Getting
Help,” to learn about Macintosh Guide, your main source of information
when you’re working with the Macintosh.
m If you want to connect other equipment, such as a printer, to your
computer, see Chapter 3, “Connecting Additional Equipment.”
m If you want to install application software on your computer, see Chapter 4
of this book for information on setting up your programs and managing
memory. You’ll need this information to properly set up software programs
specifically designed for computers with PowerPC microprocessors.
Before you begin working with your computer, be sure to read the important
health and safety information in Appendix A.
IMPORTANT If you need to turn off your computer at any point, please see
“Turning the Computer Off” later in this chapter. It is very important to use
the correct procedure for shutting down your Macintosh before turning it off.
11 Getting Started