Apple Xsan 1.x - Manual (Page 20)

20 Chapter 2 Using the Xsan Tuner Application
Performing a Test
To test the performance of a SAN volume, you need to:
 Prepare the client computers
 Choose test type and related settings
 Start the test
Step 1: Prepare the Client Computer
1 Make sure that the Xsan volume you want to test is mounted on the client.
If the volume is not mounted, use Xsan Admin to mount it.
2 Copy the Xsan Tuner application to the client you want to test.
Note: You can use the Xsan Tuner application only on computers running Mac OS X
version 10.4 or Mac OS X Server version 10.4 Tiger or later. For information on moving
your Xsan environment to Tiger, see the Xsan Migration Guide, available at
www.apple.com/server/documentation.
3 To test multiple clients on the SAN simultaneously, repeat steps 1 and 2 for each client.
Mount the Xsan volume
on the client . . .
. . . and install the Xsan
Tuner application.