Apple Xserve Intel (Late 2006) DIY Procedure for Front Panel Board Cable - Manual (Page 6)

Xserve (Late 2006) Front Panel Board Cable Replacement Instructions
Ensure the airflow duct fits flush all over, and does not protrude above the level of the
enclosure.
Note: Be careful when working with any black foam pieces that are part of the airflow duct
or the logic board.
Tighten the five Phillips screws that fasten the airflow duct to the fan array, in the order
shown, to prevent the duct from warping. Do not overtighten the screws.
Closing the Xserve
Replace and secure the cover.
Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve
in the rack.
If the server case was locked, use the enclosure key to lock the security lock on the front
panel.
2.
3.
1.
2.
3.