Apple Xserve Intel (Late 2006) DIY Procedure for Front Panel Board Cable - Manual (Page 5)

Xserve (Late 2006) Front Panel Board Cable Replacement Instructions 5
Installing the Replacement Front Panel Board Cable
Connect the replacement front panel board cable to the front panel board and the logic board.
Replacing the Left PCI Riser Card
Align the left riser card with its slot on the logic board and press to seat the riser.
Tighten the captive screws that secure the riser bracket to the back panel.
Replacing the Airflow Duct
Lower the airflow duct into position on the logic board.
Note: When installing the airflow duct, be sure to route both the front panel board cable and
the backplane-to-logic board I/O cable inside the channel under the left side of the duct.
1.
2.
1.