Bosch 500 - Manual (Page 52)

52 en | MIC Series 500 Camera
F.01U.173.601 | 2.0 | 2010.11 User’s Manual Bosch Security Systems, Inc.
A.2 MIC 500 Preset Controls
The section below lists the preset codes supported from the Bosch protocol, and the extras
that have been added to provide greater functionality directly with the Cam-set. Presets are
used to learn and return to specific positions, but in some cases are also used to enable (turn
on) and disable (turn off) a number of functions in the MIC unit.
The term “Learn Preset” is a term given to commands that store a position (for example, pan,
tilt, or zoom) that can be recalled at any given time with that command. The number of preset
positions varies between protocols, but all operate in the same manner.
The term “Go To Presets” is a term given to commands that recall a preset position, so that
the MIC unit moves to a pre-defined position and stays at this position until another command
is received.
In some cases it may not be possible to learn presets that are of high value because of
limitation of controllers and/or interfacing hardware. Bosch recommends using Universal
Camset when commissioning a MIC unit on site, and directly connecting the unit using the
MIC-USB485CVTR or another RS485 converter.
NOTICE!
Learn presets that are not listed in the table below may cause unexpected behavior of the MIC
unit and should be avoided.
Preset Number Learn and Go to Preset Function
1 - 64
Preset Positions
1 Auto Home Position
62 Wash Wipe Position
63 Auto Alarm Position
50 - 57 Multi Alarm Positions (1 - 8)
Preset Number Go To / Shot Preset Function
85
On Screen menu
86 Self Diagnosis
87 Play Pattern One
88 Stop Pattern One
89 Record Pattern One
90 Play Pattern Two
91 Stop Pattern Two
92 Record Pattern Two
98 Find End Stops
99 Show Boot Message
240 Execute Sony Set 1
241 Execute Sony Set 2
242 Execute Sony Set 3
243 Execute Sony Set 4
244 Execute Sony Set 5
245 Execute Sony Set 6
246 Execute Sony Set 7
247 Execute Sony Set 8
248 Execute Sony Set 9
249 Execute Sony Set 10