Bosch 500 - Manual (Page 12)

12 en | Unpacking MIC Series 500 Camera
F.01U.173.601 | 2.0 | 2010.11 User’s Manual Bosch Security Systems, Inc.
2 Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
2.1 Parts List
The package containing the MIC 500 Series Camera should include the following items:
2.2 Additional Tools Required
The following table lists additional tools required (not supplied by Bosch):
NOTICE!
Do not stand the canted (45°) MIC 500 Series Camera upright as it is unstable unless properly
mounted.
Quantity Part
1 MIC 500 Series Camera
1 Installation and Configuration CD (including user manuals and protocol packs)
1 Quick Installation Guide
1 MIC-USB485CVTR signal converter (enabling connection of MIC 500 Series
Camera to a PC)
Quantity Part
1 13 mm spanner for MIC 500 Series Camera PCD foot, fixing bolts
1 3 mm screwdriver for the terminal blocks in power supply
1 8 mm screwdriver for MIC Series PSU enclosure fixing screws
1 No. 2 Phillips screwdriver for MIC 500 Series Camera rain shield adjustment, if
required
1 Nebar gasket or suitable silicone sealant for ensuring a water tight seal