Rock-Slide Engineering RIDGE FRONT BUMPER BULL BAR LIGHT KIT User Manual
Page 3
Installation Instruction RSEI 116
4. Push the LED light into the hole until it snaps in. Do the same with the switch.
5. Route the black wire from the bumper to the battery. Keep the wire away
from any moving parts. Use a butt connector to connect the black wire and
the fuse box together. Use the white wire to ground to the battery using one
ring terminal. Use the other ring terminal to connect the fuse box to the
positive side of the battery.
Thank you for choosing Rock-Slide Engineering products. We value your business
and welcome your feedback/suggestions. If you have any concerns please contact
us directly @ 435-752-4580. We are here to help you!