CARR 101244 Hoop II Multi-Mount Step User Manual
Hoop ii multi-mount step installation instructions, Diagram c diagram d, Diagram a
Hoop II Multi-Mount Step Installation Instructions
Part No’s: 101241 / 101242 / 101244
Quality and Style that Endures
Follow the diagram and the
written directions carefully for a
proper, safe installation.
Should you encounter an
unusual, unforeseen problem,
contact our Technical Help Line
7:00 AM – 3:00 PM Pacific Time
(951) 719-1068
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
Quality and Style that Endures
Follow the diagram and the
written directions carefully for a
proper, safe installation.
Should you encounter an
unusual, unforeseen problem,
contact our Technical Help Line
7:00 AM – 3:00 PM Pacific
Time
(951) 719-1068
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
Diagram C
Diagram D
Lift carpet
rear doors only
“L” Bracket
Large
mounting
bracket
Vehicle Application:
JEEP
‘07-‘14 JK Wrangler
MATERIAL NEEDED:
Drill Motor, 5/16” drill bit, 1/8” drill bit, 2 - ½” wrench, 2 - 7/16” wrench, Vise
(Rear door steps only), Phillips screw driver, pencil.
MATERIAL FURNISHED:
2 – Hoop II step castings, 4 – Large mounting brackets, 4 – “L” brackets, 2 –
Hardware packs, 1 – Instruction. (Important! Not all of the parts in these
hardware packs may be needed for proper installation).
Diagram A
Front doors
Diagram B
Rear doors
Driver side shown here
WAX YOUR
STEP ON A
REGULAR
BASIS TO
MAINTAIN ITS
LUSTER