CARR 301851 HD 18” Tube Step - Manual

Quality and Style that Endures
Follow the diagram and the
written directions carefully for a
proper, safe installation.
Should you encounter an
unusual, unforeseen problem,
contact our Technical Help Line
7:00 AM – 3:00 PM Pacific Time
(951) 719-1068
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
Quality and Style that Endures
Follow the diagram and the
written directions carefully for a
proper, safe installation.
Should you encounter an
unusual, unforeseen problem,
contact our Technical Help Line
7:00 AM – 3:00 PM Pacific
Time
(951) 719-1068
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
HD 18” Tube Step Installation Instructions
Part No’s: 301850 / 301851
WAX YOUR STEP ON A
REGULAR BASIS TO
MAINTAIN ITS LUSTER
Vehicle Application:
JEEP
‘97-‘06 TJ Wrangler
5/16” Carriage Bolts
Vehicle Body Metal
MATERIAL NEEDED:
Drill motor, 3/8” drill bit, 1/8” drill bit, ¼” drill bit, pencil, Phillips screw driver,
center punch, two ½” wrenches, two 7/16” wrenches, and silicone.
MATERIAL FURNISHED:
Two 18” tubes, four black mounting castings, four zinc plated steel brackets,
instruction page and two hardware packs(Important! Not all of the parts in these
hardware packs may be needed for proper installation).
Use the 5/16 X 2 ½” Button
Head Bolts when assembling
the black mounting castings
to the open ends of the tube.
For proper alignment, the
tread plate can be rotated in
three different positions.
Detail B