CARR 301881 HD 18” Tube Step - Manual

HD 18” Tube Step Installation Instructions
Part No’s: 301880 / 301881
Quality and Style that Endures
Follow the diagram and the written
directions carefully for a proper, safe
installation.
Should you encounter an unusual,
unforeseen problem, contact our
Technical Help Line
7:00 AM – 3:00 PM Pacific Time
(951) 719-1068
Visit our web-site at
www.CARR.com
Carr Pattern Co., Inc.
WAX YOUR STEP ON A
REGULAR BASIS TO
MAINTAIN ITS LUSTER
Vehicle Application:
FORD
‘99-‘13 Super Duty PU all Cabs/all doors/all series
‘00-‘04 Excursion all doors
MATERIAL NEEDED:
Drill motor, 3/8” drill bit, 1/8” drill bit, ¼” drill bit, pencil, Phillips screw driver,
center punch, two ½” wrenches, two 7/16” wrenches, and silicone.
MATERIAL FURNISHED:
Two 18” tubes, four black mounting castings, four steel mounting brackets,
instruction page and two hardware packs (Important! Not all of the parts in these
hardware packs may be needed for proper installation).
Bracket Mounting Face Angled Reinforcing Metal
5/16 Jam Nuts
Vehicle Body Metal
Detail A
Use the 5/16 X 2 ½”
Button Head bolts when
assembling the black
mounting castings to the
open ends of the tube.
For proper alignment,
the tread plate can be
rotated in three
different positions.
Mark vertical center
line on the outside
painted surface of the
pinch weld