BOXLIGHT PREMIERE 30HD - Manual (Page 16)

14
CONNECTIONS AND SETUP
Connecting the Projector to Other Devices
Before Setting Up
Note
• Before connecting, be sure to turn off both the projector and the devices to be connected. After making
all connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections
are made.
• Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to
Video equipment:
„ A VCR, Laser disc player or other video equipment.
„ A DVD player or DTV* decoder.
*DTV is the umbrella term used to describe the new digital television system in the United States.
A computer using:
„ HD 15-pin VGA to HD 15-pin VGA cable (sold separately optional).
„ A DVI-D to DVI-D cable (sold separately optional).
„ A RS-232C cable (sold separately optional).
Connecting the Power Cord
Plug in the supplied power cord into the
AC socket on the rear of the projector.
Supplied
accessory
Power cord
S-VIDE O
VIDEO
Pr/Cr Pb/Cb Y Pr/Cr Pb/Cb Y
PC
DVI
WAR NING
• Do not disass emble any components except
the lamp chassis cove
r while replacing the lamp
.
• Do not touch ventilation sl ots, lamp and objects next to them until they have s
ufficiently cooled down.
• Never insert any object s through vent ilation holes.
• Do not use th is unit nea r water or in a rainy/moist environment.
• Keep at least 0.3 foot (10 cm) of space b
etween ventilation slots and nearest ob
ject or wall.
Made in Taiwan RS-232