Brother XE5427-001 - Manual (Page 27)

LCD (Liquid Crystal Display) Operation 25
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Checking machine operating
procedures
Simple explanations can be referred on the LCD
display for the following items.
Displays simple explanations of setting upper thread /
bobbin winding / setting bobbin thread / embroidery
unit attachment / embroidery frame attachment /
needle replacement on the LCD.
a
Turn on the machine.
X The LCD comes on.
b
Press (Help key) on the operation
panel.
X The help screen appears.
c
Press the item to be displayed.
X The first screen describing the procedure for
the selected topic appears.
d
Press (Next page key) to switch to the
next page.
Press (Previous page key) to return to the
previous page.
Press (Back key) to return to the item
selection screen.
Example: Upper threading
e
After you finish viewing, press (Back
key) two times.
X The initial screen appears again.
Memo
z For details on each topic, refer to the
corresponding page in this Operation
Manual.
a Upper threading
b Bobbin winding
c Bobbin installation
d Needle replacement
e Embroidery frame attachment
f Embroidery unit attachment
a b c
d e f
0711-0120-C-combo_E.book Page 25 Thursday, July 24, 2008 1:46 PM