Fast & Fluid TM300 - Manual (Page 7)

Installation
Step 1 - Detach the dispenser from its transport skid
7
>
Place the transport pallet near the defi nitive
location of the machine. Remove cardboard box,
plastic wrapping and accessory parts.
Remove one of either side panels.
>
Unscrew transport the transport screws
connecting the machine to the skid from the
inside of the computer cavity.
Detach the supporting wooden blocks.
Move the machine off the pallet.
Keep the fastening bows of the pallet, the two wooden beams and the two foam parts
for possible future transportation.