Fast & Fluid TM300 - Manual (Page 12)

Daily Maintenance
Clean the brush tray, refi ll canisters and run morning program
>
Remove the brush tray and empty the container.
Clean the brush with water and refi ll the container
with correct fl uid (e.g. water).
Fill canisters if level is low and update levels in
software. Stir colorant beforehand.
Use only cleaning fl uids recommended by your paint supplier.
Wrong materials can result in nozzle blockage and reduced accuracy.
Start software morning program to purge valves
and clean nozzles. Check your software manual
for details.
>
12