Fast & Fluid TM300 - Manual (Page 13)

Weekly Maintenance
Remove spilt paint & colorant and refi ll canisters
Check canister content and refi ll if necessary.
Always close canisters and machine lids after refi lling.
Monthly Maintenance
Check and clean important functional parts
Remove back panel and check pump valve for
possible malfunctions (e.g. leakage or blockage).
>
Attention! MOVING PARTS CAN CAUSE INJURY. Always turn off power (e.g.
by pressing emergency stop) before accessing moving parts.
13
Clean can table and outside parts with diluted
detergent.
>