Fast & Fluid TM300 - Manual (Page 10)

Fill the brush tray (nozzle cleaning system)
>
Remove the brush tray at the left side of the
dispenser.
Fill the container with water or an alternative
liquid proposed by your paint supplier.
Replace the brush tray in its original position.
Cleaning fl uid must be refreshed daily!
Use only cleaning fl uids recommended by your paint supplier.
Wrong materials can result in nozzle blockage and reduced accuracy.
Fill the canisters with colourant
>
Access the canisters from either side top lid and
remove the canister lids.
Check your software manual for fi lling sequence.
Run software purge program twice to remove air
from system.
10