Step 3 - detach shaker from its transport skid – Fast & Fluid SK350 User Manual
Page 7
Fast & Fluid Management – SK350
V 2.0
page 7
Step 3 - Detach shaker from its transport skid
>
Pull out cord to remove
frame lock’s loose parts.
Ensure all loose parts have
been removed – two bolts
and two wooden blocks.
For optimal mixing results and silent operation it is essential to
correctly level the machine and lock the adjustable feet.
Tip: before locking the adjustable feet, start a mixing cycle with a small
load (<5kg). While the SK350 runs, check if all four feet are firmly in
contact with the floor and then lock them.
Step 4 - Place the machine in its final operational position
>
>
Lower the adjustable
feet far enough to lift
the machine off its
wheels.
Take care to correctly
level the machine (by
turning the adjustable
feet).
Lock all adjustable feet by
tightening the their
separate bolts.