Fast & Fluid SK350 - Manual (Page 12)

Fast & Fluid Management – SK350
V 2.0 page 12
C - User of the SK350
Keyboard
Check if the machine has been correctly installed and power on
Turn the emergency stop clockwise to unlock
Open the door and container(s) inside as described in the chapter “operation” step 2.
Close the door.
Push on start key(s) to start the machine. Follow the default shaker times.
T1 T2 T3
30sec. 60sec. 150sec.
It is possible to push (in the same time) 2 or 3 keys to add the stirring times as indicated:
T1+T2 T1+T3 T2+T3 T1+T2+T3
1min. and 30sec. 3min. 3min and 30sec. 4min.
The clamping plate will move downwards and will clamp the container, immediately the
shaking starts for the setting time
After the shaking period the machine shall stop and will move the clamping plate automatically
upwards. Before opening the door and remove the container please wait till the frame is not
moving anymore. If necessary place a new container, close the door and repeat procedure.
Notes:
The shaking cycle can be interrupted while it is in progress by pressing the Stop/Up-button.
The clamping plate will automatically move upwards then.
In an emergency, pressing the emergency switch can also interrupt the shaking cycle. In this
case it is released by turning it a quarter turn to the left.
WARNING: Do not reach into the machine until it has come to a compete standstill!
Power Led
Start
T1
Start
T2
Start
T3
Stop
Up
Emergency
button