Fast & Fluid SK350 - Manual (Page 11)

Fast & Fluid Management – SK350
V 2.0 page 11
B - Operating the SK350
Step 1 - Place can, choose the shaking time and push the start key
> >
Place the container in
the can table center,
place filler disc
Close door. Choose shaking time T1,
T2 or T3 and press
desired timing button.
Clamping and mixing will
now start.
Attention! The mixing program will not start unless the door is
closed.
Step 2 - Program ends or is interrupted, remove can
> >
To interrupt the
mixing program, press
the stop button. Use
the emergency stop
only in case of a true
emergency.
When the program
finishes or is interrupted
with the stop button, the
SK350 will unclamp
automatically.
Open door and remove
container.
Attention! Only use the emergency stop button in case of a true
emergency. After pressing the emergency stop, wait at least 15
seconds before unlocking it (turn clockwise). then press Stop/up Key
to unclamp the container.