BT DIVERSE 5400 - Manual (Page 54)

g
BT Diverse Helpline – 08457 908 070
52
HANDSET
SETTINGS
Note
The room monitor function drains the
handset batteries more quickly than
normal use. Make sure the handset is
fully charged before leaving it in the
room to be monitored.
To switch the room monitor on
When there are sounds in the
room, the monitor function
detects them.
The listening handset then
rings either the receiving
handset selected or the phone
number you have set. You can
then listen.
Using a handset as a
room monitor
If you have at least two handsets
registered to your BT Diverse 5400
base station you can leave one handset
in a room and monitor the sounds in
the room by making an internal or an
external call to another handset. This
could be used, for example, in a child’s
bedroom.
Place the handset 1-2 metres away,
with the microphone facing the child.
Always check that the phones are
working properly.
Press MENU.
Scroll DOWN to Add. Features .
Press OK. Display highlights
Room Monitor .
Press OK. Display shows the
Room Monitor setting.
Press RIGHT to switch the
Room Monitor setting On
Scroll DOWN to Call to .
Press RIGHT.
Either enter the internal
number of a handset.
Or
Enter the telephone number of
a phone which you want to use
as a listening device.
Press MENU. Display shows
Save Entry .
Press OK. Display returns to
the Room Monitor setting.
Scroll DOWN to Level .
Press LEFT or RIGHT to set
the sensitivity Low or High .
Press SAVE to confirm. The
room monitor function is now
switched on.
OK
OK
OK
SAVE
MENU
OK
5201 Diverse5400 u_g [3] 29/8/03 5:42 PM Page 52 (Black plate)