Gradall 534D-6T Parts Manual - Manual (Page 38)

3-2 TT
1). Add bearing pad shims & spacers as required to shim boom to
within 1/16" of a tight fit. Amounts of shims can vary at each shim point.
When a shim is used with a pad, a spacer must be inserted between pad
& shim. No pads shall sit directly on slotted surface of shims.
2). The length of pad bolts depend on the amount of shims used. Bolt
cannot extend past chamfer on bearing.
NOTE:
Item Part No. Qty. Description Of Part
1 9112-1082 8 SHIM, (.06 thick)
2 9112-1083 4 SPACER, (.06 thick)
3 9112-3019 4 BEARING PAD
4 8820-1534 4 HEX HD CAPSCREW, 3/8-24x1,
GR5, (torque to 32-37 ft. lbs.)
8820-1535 AR HEX HD CAPSCREW, 3/8-24x1-1/4,
GR5, (torque to 32-37 ft. lbs.)
5 8856-1109 16 FLAT WASHER, 3/8
6 9108-3063 2 BEARING PAD
7 9002-7471 6 HARDENED WASHER, 1/2
8 8820-1562 6 HEX HD CAPSCREW, 1/2-20x3/4,
GR5, (torque to 68-78 ft. lbs.)
8820-1564 AR HEX HD CAPSCREW, 1/2-20x1,
GR5, (torque to 68-78 ft. lbs.)
9 9108-1172 2 SPACER, (.132 thick)
10 8820-1538 4 HEX HD CAPSCREW, 3/8-24X2,
GR5, (torque to 32-37 ft. lbs.)
Item Part No. Qty. Description Of Part
11 9112-3021 2 BEARING PAD
12 8820-1532 8 HEX HD CAPSCREW, 3/8-24x3/4,
GR5, (torque to 32-37 ft. lbs.)
8820-1534 AR HEX HD CAPSCREW, 3/8-24x1,
GR5, (torque to 32-37 ft. lbs.)
13 9112-6012 1 BOOM, SECOND SECTION
14 9108-3297 2 BEARING PAD
15 9108-1447 2 SPACER, (.132 thick)
16 9112-1081 2 SHIM, (.06 thick)
17 8820-1565 4 HEX HD CAPSCREW, 1/2-20x1-1/4,
GR5, (torque to 68-78 ft. lbs.)
8820-1566 AR HEX HD CAPSCREW, 1/2-20x1-1/2,
GR5, (torque to 68-78 ft. lbs.)
18 9020-5870 4 SHIM, (.06 thick)
19 9103-1236 2 SPACER, (.06 thick)
20 9103-3186 2 BEARING PAD
BOOM
Second Boom Section
534D-6 Starting Serial No. 0588001
534 D6-TURBO Starting Serial No. 0588008
Original Issue 12-97
Revised 7-12-02
* Added note to illustration.
NOTE: ALL 534D-6 AND 534D-6 TURBO
MACHINES WITH THE 42’ BOOM
OPTION MUST SEE PAGE 13-14
FOR DETAILS.