Gradall 534D-6T Parts Manual - Manual (Page 230)

13-24
OPTIONAL EQUIPMENT
(9108-5073) Hydraulic Reservoir Heater Installation
Original Issue 12-96
Revised 7-1-99
1. INSTALL BLANKET WHEN ASSEMBLING HYDRAULIC TANK.
AVOID EXCESSIVE OVERSPRAY WHEN FINAL PRINTING.
2. BLANKET TO BE INSTALLED ON HYDRAULIC TANK WALL,
BETWEEN HYDRAULIC TANK AND FUEL TANK.
3. POSITION BLANKET AS CLOSE TO CENTER OF TANK AS
POSSIBLE.
4. STOW AWAY ELECTRICAL CORD BETWEEN TANKS.
5. AFTER INSTALLING BLANKET ON TANK, PLUG INTO OUTLET
OR (1) HOUR TO COMPLETE ADHESION.
PCN 990032, 990164 - JH
Item Part No. Qty. Description Of Part
9108-5073 1 HYDRAULIC RESERVOIR HEATER
(includes all items)
1 9108-3574 1 HEATING BLANKET
2 9108-3430 1 PLUG
* Changed Part No. on items 1 & 2.
*
*