Philips CDV19BPH - Manual (Page 10)

Connecting to a Dolby Digital
Decoder or DTS Decoder
If you connect the TV/DVD to a Dolby
Digital or DTS decoder, you can enjoy a
more realistic, high-quality sound when
playing Discs recorded in 5.1 channel Dolby
Digital Surround or DTS Surround Sound
formats.
10 Optional Connections (cont’d)
ANT.
AUDIO OUT R L
DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby
Laboratories, Inc. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
1
Complete the antenna/cable connections as described on
pages seven-eight.
2
Connect an audio coaxial digital cable (not supplied) to
the DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXI-
AL jack on the back of the TV/DVD and to the COAXIAL
DIGITAL AUDIO IN jack on the decoder.
3
• If the TV/DVD is connected to a Dolby Digital decoder, set
DOLBY DIGITAL to ON. Details are on pages 46-47.
• If the TV/DVD is connected to a DTS decoder, set DTS to ON.
Details are on pages 46-47.
• If the TV/DVD is not connected to a Dolby Digital decoder or a
DTS decoder, set DOLBY DIGITAL and DTS to OFF. Details are
on pages 46-47. Using incorrect settings may cause noise distortion
and damage the speakers.
To DIGITAL
AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
on back of TV/DVD
To COAXIAL DIGITAL
AUDIO IN jack of Decoder