Brother FAX-1575mc - Manual (Page 76)

9 - 3 M E S S A G E C E N T E R
4
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time. Please leave a
message after the signal. If you wish to send a fax, please press
5 1, wait for fax
tones, then press the Start button.
5
Replace the handset. The Message Center will play your OGM.
6
Press Stop/Exit.
Listening to Outgoing Message (OGM)
1
Press Menu/Set, 8, 3.
2
Press to select MSG CTR OGM? (or F/T OGM), and then press Menu/Set.
3
Press to select PLAY OGM?, and then press Menu/Set. Adjust the volume by
pressing Volume .
4
Press Stop/Exit.
Erasing Outgoing Message (OGM)
1
Press Menu/Set, 8, 3.
2
Press to select MSG CTR OGM? (or F/T OGM), and then press Menu/Set.
3
Press to select ERASE OGM?, and then press Menu/Set.
4
Press 1 to erase the OGM—OR—Press 2 to exit without erasing.
5
Press Stop/Exit.
Activating Message Center Mode
Press and hold until it lights and
the LCD shows:
When light is out, the Message Center is OFF.
(See Setting Up the Message Center, page 9-2.)
3.OGM
or
or
or
3.OGM
or
or
MC:MSG CTR