Philips MLINK - Manual (Page 19)

P
ROGRAMMING
Y
OUR
P
ERSONAL
M
ACRO
RECORD
PERSONAL
ADD DELAY
1 2 3 4 5 6 7 8
DELETE STEP
DVD
SUBTITLE
AUDIO
USER1
USER2
USER3
5
L
ig
h
ti
n
g
/A
la
rm
5
L
ig
h
ti
n
g
/A
la
rm
1
VCR1
VCR2
DVD1
DVD2-CVI
LD
SETUP
SELECT DEVICE
DVD-CVI
CVI
SETUP
SELECT DEVICE
CHOOSE SOURCE
CHOOSE BRAND
DELETE DEVICE
MACRO
SUBTITLE
AUDIO
USER1
USER2
USER3
SETUP
CHOOSE BRAND
LEARN
HOLD DVD
REMOTE CLOSE
TO BLASTER
AND PRESS KEY
DVD-CVI
NEW
3 4
5 6
PHILIPS LEARN
NEW
DVD-CVI
SETUP
CHOOSE BRAND
RECORD
PERSONAL
ADD DELAY
1 2 3 4 5 6 7 8
DELETE STEP
DVD - USER1
19
I f you have infrared remote-con-
trolled room lighting, you can use
the Personal macro to control the
lighting. The room lighting remote
functions can be learned into M-Link
™
as the USER1, USER2, and USER3
items in the list of device functions for
a DVD, for example. If you want to
program the lighting into the
Personal macro, follow these steps.
Set up the infrared lighting
model you want to use.
Press the M LINK button to
enter the M-Link ™ menu.
Press the CURSOR LEFT or
CURSOR RIGHT button until
you enter the SETUP menu.
NOTE: For this example, the light-
ing functions will be learned in with
the list of DVD functions. Thus the
following steps assume that you
have already had M-Link
™ learn the
remote functions of the DVD.
NOTE: See the section “Setting
Up a New or Multibrand Accessory
Device” (beginning on page 10) as
a refresher for the next two steps.
Within the SETUP menu, go into
SELECT DEVICE and select
DVD; then go into CHOOSE
BRAND and choose NEW.
Within the LEARN menu for the
DVD, cursor down the menu to
USER 1, USER 2, and USER 3
and have M-Link
™ learn the remote
functions of your infrared remote-
controlled room lighting through
the IR Blaster.
After having M-Link ™ learn the
remote functions of your infrared
remote-controlled room lighting,
you can then go to the DVD’s set of
function steps while programming
your Personal macro and add the
room lighting functions as USER1,
USER2, and USER3.
Although you will actually have M-Link ™ learn remote functions of
your infrared remote-controlled room lighting, the message will refer
to DVD because you are using the DVD menu for the learning.