Philips 32RF52S - Manual (Page 7)

Ⅲ
6
AV 3
AV 2
CVI
AV 1
AUDIO OUT
R L S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
1
3 4
5
7
2
6
7
T he TV’s audio/video input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar device)
that has audio/video output jacks. Follow the
easy steps below to connect your accessory
device to the AV 1 Input Jacks located on the
back of the TV.
1 Connect the VIDEO (yellow) cable to
the VIDEO AV 1 in jack on the back of
the TV.
2 Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
AV1 in jacks on the rear of the TV.
3 Connect the VIDEO (yellow) cable to
the VIDEO OUT jack on the back of
the VCR.
4 Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR.
5 Turn the VCR (accessory device) and
the TV ON.
6 Press the CH + or – buttons on the
remote control to scroll the channels
and select the AV 1 channel. AV 1 will
appear in the upper left corner on the
TV screen.
7 With the VCR (or accessory device)
ON and a prerecorded tape (CD, DVD,
etc.) inserted, press the PLAY button
to view the tape on the television.
U
SING THE
AV 1 I
NPUT
J
ACKS
Remember to select the AV channels, use the
CH + or – buttons to scroll the series of
channel below the lowest numbered channel
(gernerally below channel 2).
c c C
HECK I T O UT
AUDIO IN
(RED/WHITE)
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
VIDEO IN
(YELLOW)
BACK OF VCR
BACK OF TV