Philips 32RF52S - Manual (Page 22)

22
I f you have connected the TV’s AUDIO
OUTPUT jacks to the AUDIO INPUT jacks
on a stereo receiver (see page 12 for connec-
tion instructions), set AUDIO OUT to either
VARIABLE or FIXED to determine whether
you adjust the volume at the stereo or at the
TV. If you select VARIABLE, change the vol-
ume at the TV using the TV’s remote control.
If you select FIXED, adjust the volume at the
stereo using the stereo’s controls. To select
FIXED or VARIABLE, follow these steps.
1 Press the MENU button on the
remote control to show the onscreen
menu.
2 Press the CURSOR DOWN once to
highlight SOUND.
3 Press the CURSOR RIGHT and the
menu will shift to the left. TREBLE
will be highlighted and an adjustment
bar will be shown to the right.
4 Press the CURSOR DOWN repeated-
ly until AUDIO OUT is highlighted.
5 Press the CURSOR RIGHT or
LEFT to select FIXED or VARIABLE.
6 Press the STATUS/EXIT button to
remove the menu from the screen.
H
OW TO
U
SE THE
A
UDIO
O
UT
C
ONTROL
Ⅲ
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
TREBLE 30
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
AVL
INCR. SURROUND
STEREO
SAP
AUDIO OUT FIXED
SOUND
OR
AVL
INCR. SURROUND
STEREO
SAP
AUDIO OUT VARIABLE
SOUND
6
1
5
2,4
3
5
FIXED – If FIXED is selected, the sound
coming from the TV and being heard
through an external audio system is not
adjustable with the television’s volume
controls. The volume would have to be
adjusted at the audio system.
VARIABLE – If VARIABLE is selected,
the sound coming from the TV and being
heard through an external audio system can
be adjusted at the TV using the Volume +
or – buttons on the television or remote
control.
Remember, the connection instructions for
an external audio system is located on page
12.
H ELPFUL H INT