Philips 32RF52S - Manual (Page 48)

48
Y our remote control is capable of working
your TV and many other devices that
respond to infrared remote control commands,
such as VCRs, cable boxes, satellite systems,
and DBS. Your remote may be already, as is, to
work an accessory device, or you may need to
use one of the methods (“Code Entry” or
“Search”) explained on pages 49 and 50.
First, try this simple test to see if your TV
remote control will give you direct access to
the accessory device’s functions, or if you will
need to try another method in order to set up
your TV remote control for that capability.
1 Slide the TV/VCR/ACC Switch to
the proper position on the remote
control.
2 Point the remote control at the remote
sensor window of the accessory device
and press the POWER button.
3 Does the remote control turn the device
ON?
If YES, stop and try other function buttons on
the remote. If they also work the device, then
the remote is ready and no further steps are
needed.
If NO, go to the next page to try the Code-
Entry method.
U
SING THE
R
EMOTE WITH
A
CCESSORY
D
EVICES
- D
IRECT
A
CCESS
Ⅲ
1
2
Cable Converter
Satellite Receiver
VCR
It is recommended that you use Philips
brand external accessory devices with your
Philips television to insure proper remote
control functions. If you are using Philips
brand accessory devices, your remote con-
trol should be ready to use with these
devices.
H
ELPFUL
H
INT