Philips VRX463AT99 User Manual

Page 52

POWER

CBL/DSS

VCR

EJECT

MUTE

JOG/SHUTTLE

EXIT/STATUS

CLEAR

VCR PLUS+/ENTER

F.ADV

PAUSE/STILL

100

GO-TO

MEMO

INDEX

VAR.

SLOW

REMOTE LOCATOR

SKIP

VCR/TV

SPEED

SLOW TRACKING

STOP

REW

PLAY

VOL

CHANNEL

/OTR

REC

52 Tape Counter Memory

When tape playback is stopped, press the REW(ind) but-
ton or the FF (Fast Forward) button to go to the location
on the tape at which the tape counter was reset to zero.
Press the PLAY button to watch the tape.

• You may only set the tape counter

to zero at one location at a time. If
you try to set a second tape counter
location to zero, the previous tape
counter to zero setting will be
erased.

• To erase the tape counter memory,

press the MEMO(ry) button. The
Memory light will disappear from
the display panel.

• The tape counter memory may not

operate during Repeat Playback.
Details are on page 54.

Helpful Hints

0 : 00 : 00

M 0 : 00: 00

Using the Tape Counter

Follow the steps below to reset the tape counter to zero at a
tape location you want to refer to later.

Play, fast forward, or rewind a tape to the location that you would
like to refer to later. Press the STOP button to stop the
tape.

Press the EXIT/STATUS button. The status display, which
includes the tape counter, will appear on-screen.

While the tape counter is still on-screen, press the
CLEAR button to reset the tape counter to zero.

While the tape counter is still on-screen, press the
MEMO(ry) button so that M appears beside the tape
counter. The Memory light will appear on the display panel.