Philips VRX463AT99 - Manual (Page 17)

POWER
CBL/DSS VCR TV
EJECT
MUTE
MENU
JOG/SHUTTLE
EXIT/STATUS CLEAR
VCR PLUS+/ENTER
F.ADV
PAUSE/STILL
1 2 3
4 5 6
7 8 9
100 0 GO-TO
MEMO INDEX
VAR.
SLOW
REMOTE LOCATOR
SKIP VCR/TV SPEED
SEARCH
SLOW TRACKING
STOP
REW FF
PLAY
VOL
CHANNEL
/OTR REC
6
Press the EXIT/STATUS button. You will be prompted to
turn off the VCR.
Setting the Clock (cont’d) 17
SET CLOCK
1 AUTO CLOCK (ON)
2 DAYLIGHT SAV TIME (ON)
3 SET MANUAL CLOCK (OFF)
4 SET TIME ZONE
(AUTO)
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
1
Press the VCR button, then press the MENU button.
2
Press the Number 5 button to select SET CLOCK. CABLE
BOX USERS SET CLOCK MANUALLY will appear on-screen
briefly. Then, the menu shown below will appear. (If AUTO
CLOCK is set to OFF, SET TIME ZONE will not be available.)
3
If (ON) appears to the right of AUTO CLOCK, press the
Number 1 button twice. If (OFF) appears to the right of
AUTO CLOCK, press the Number 1 button once.
4
Press the Number 1 button to select SET PBS CH.
AUTO to have the VCR find the PBS channel from which to take
the time.
5
The Time Zone selection menu will appear. Press one Number
button to enter the single-digit code for your Time Zone.
• The time will be updated at the top
of each hour (except at 11 p.m.,
midnight, 1 a.m. and 2 a.m.).
• To display the time, press the
EXIT/STATUS button. A status dis-
play will appear on the TV screen.
(ON SCREEN OFF can not be the
selected status display mode.)
Details are on page 28.
• Power failures can cause you to lose
your clock setting and programmed
channels.
Helpful Hints
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
1 SET PBS CH. AUTO
2 SET PBS CH. MANUAL
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
1
5
2
4
3
7
7
Press the EXIT/STATUS button, then press the POWER
button to turn off the VCR.
Auto will flash in the display panel until the clock is set. Leave the
VCR power off until the clock is set. If --:-- appears on the display
panel after you turn off the VCR, the VCR could not find the time.
You may need to tell the VCR the PBS channel from which to
take the time. Follow the steps on page 16.
6
Automatic PBS Channel Selection