Philips VRX463AT99 - Manual (Page 32)

POWER
CBL/DSS VCR TV
EJECT
MUTE
MENU
JOG/SHUTTLE
EXIT/STATUS CLEAR
VCR PLUS+/ENTER
F.ADV
PAUSE/STILL
1 2 3
4 5 6
7 8 9
100 0 GO-TO
MEMO INDEX
VAR.
SLOW
REMOTE LOCATOR
SKIP VCR/TV SPEED
SEARCH
SLOW TRACKING
STOP
REW FF
PLAY
VOL
CHANNEL
/OTR REC
3
Press the REC(ord)/OTR button 2 - 19 times, until the
desired recording length (30 minutes to nine hours) appears in the
upper left corner of the screen and on the display panel briefly.
The OTR light will flash on the display panel; the REC(ord) light
will appear on the display panel.
32 One Touch Recording
• To check the time remaining for an
OTR after the OTR is in progress,
press the EXIT/STATUS button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired length appears on-screen.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.
• You may not be able to access the
menu during an OTR.
Helpful Hints
OTR (0:30)
CH 12
SLP
Stopping an OTR
To stop an OTR before recording is finished, press the STOP but-
ton.
To cancel the OTR but continue recording, press the
REC(ord)/OTR button until REC appears in the upper left corner
of the TV screen. The REC(ord) light will remain on the display
panel, but the OTR light will disappear.
The one touch recording (OTR) function allows you to start an
immediate timed recording 30 minutes to nine hours long of the
channel you are watching. Before you begin, make sure:
• Channels are programmed. Details are on page 12.
• The desired recording speed (SP or SLP) has been selected with
the (Tape) SPEED button. Details are on pages 36 and 58.
• There is a tape in the VCR. Make sure the tape’s record tab is
intact (see page five) and the tape is long enough to record the
program(s). If the end of the tape is reached during an OTR,
recording will stop. The VCR will eject the tape and turn itself
off.
• The VCR is in VCR position. (The VCR light will appear on the
display panel of the VCR when the VCR is in VCR position. If
the VCR light does not appear, press the VCR/TV button once.)
Starting an OTR
1
Press the VCR button.
2
Use the CHANNEL Up/Down buttons or the Number
buttons to select the channel you want to record.
1
2
3