Philips 34PW9819-17 - Manual (Page 12)

12
I f using an accessory device that is not high
definition but uses Component Video jacks.
The AV1 jacks on the TV offer the user the
possibility of better video reproduction using
the Component Video Inputs. The color dif-
ference signals (Pb, Pr) and the luminance
(Y) signal are connected and received sepa-
rately, which allows for improved color band-
width information (not possible when using
composite video or S-Video connections).
1 Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD play-
er (or similar device) to the (Y, Pb, Pr)
IN(put) jacks on the TV. When using
the Component Video Inputs, it is best
not to connect a signal to the AV1
Video Input.
2 Connect the yellow VIDEO CABLE
along with the red and white AUDIO
CABLES to the AUDIO (left and
right) OUT(put) jacks on the rear of the
accessory device to the AV1 VIDEO
and AUDIO IN(put) jacks on the TV.
3 Press the SOURCE button on
the remote control to display the
SOURCE menu.
4 Press the CURSOR UP or DOWN
button to select the AV1 option. CVI
will show onscreen rather than AV1.
5 Press the OK button to confirm your
selection. The TV will change to the
AV1 channel.
6 Turn the TV and the DVD (or digital
accessory device) ON.
7 Insert a DVD disc into the DVD player
and press the PLAY
ᮣ button on the
DVD Player (or digital accessory
device).
S-VIDEO
OUT OUT OUT
L
R
AUDIO VIDEO COMP VIDEO
Y Pb
Pr
2
1
6
7
CVI
Source
TV
AV1: VCR
AV2: Recorder
AV3: DVD
AV4: HD
SIDE: Camera
3
4
4
5
U
SING THE
C
OMPONENT
V
IDEO
I
NPUT
(CV1) J
ACKS
The description for the component video
connectors may differ depending on the
DVD player or accessory digital source
equipment used (for example, Y, Pb, Pr; Y,
B-Y, R-Y; Y, Cr, Cb). Although abbrevia-
tions and terms may vary, the letters b and r
stand for the blue and red color component
signal connectors, and Y indicates the lumi-
nance signal. Refer to your DVD or digital
accessory owner’s manual for definitions
and connection details.
H
ELPFUL
H
INT
AUDIO IN
(RED/WHITE) COMPONENT
VIDEO
CABLES
BACK OF TV
ACCESSORY DEVICE
EQUIPPED WITH
COMPONENT VIDEO
OUTPUTS.
The CVI connection will be
dominate over the AV1 Video
Input. When a Component Video
Device is connected as described,
it is best not to have a video sig-
nal connected to the AV1 Video
Input jack.
VIDEO
(YELLOW)
CABLE