Philips Norelco SHAVER Series 9000 wet and dry electric shaver S9721-84 V-Track Precision Blades Contour Detect Technology SmartClean System PRO Digital User Interface with SmartClean System PRO and Aquatec Wet & Dry - Manual (Page 9)

9
Charging in the SmartClean system
1 Put the small plug in the SmartClean system.
2 Put the adapter in the wall socket.
3 Press the top cap to be able to place the shaver in the holder (‘click’).
4 Hold the shaver upside down above the holder. Make sure the front
of the shaver points towards the SmartClean system.
5 Place the shaver in the holder (1), tilt the shaver backwards (2) and
press down the top cap to connect the shaver (‘click’) (3).
Note: The battery symbol lights up to indicate the appliance is charging.
Using the shaver
Shaving
Skin adaptation period
Your first shaves may not bring you the result you expect and your skin may
even become slightly irritated. This is normal. Your skin and beard need time to
adapt to any new shaving system.
We advise you to shave regularly (at least 3 times a week) with this shaver for
a period of 3 weeks to allow your skin to adapt to the new shaver.
Tip: To ensure the best result, we advise you to pre-trim your beard if you have
not shaved for 3 days or longer.
Note: This appliance can only be used cordlessly.
1 Press the on/off button once to switch on the shaver.
Tip: Select your personal settings (see chapter ‘The display’).
, The display lights up for a few seconds.
2 Move the shaving heads over your skin in circular movements.
- Do not make straight movements.
ENGLISH 9