Philips Norelco SHAVER Series 9000 wet and dry electric shaver S9721-84 V-Track Precision Blades Contour Detect Technology SmartClean System PRO Digital User Interface with SmartClean System PRO and Aquatec Wet & Dry - Manual (Page 20)

20
4 Remove the shavings heads from the shaving head holder and throw
them away.
5 Place new shaving heads in the holder.
Note: Make sure the projections of the shaving heads fit exactly into the
recesses.
6 Place the retaining ring holder on the retaining ring (1), place it
on the shaving head (2) and turn it clockwise (3) to reattach the
retaining ring.
Repeat this process for the other retaining rings.
7 Reattach the shaving head holder to the bottom part of the shaving
unit.
8 To reset the shaver, press and hold the on/off button for
approx. 7 seconds. Wait until you hear two beeps.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service.
or go to your Philips dealer. You can also contact the Philips Consumer
Care Centre in your country (see the worldwide guarantee leaflet for
contact details).
ENGLISH
20