Rear panel 21, Caution – Philips DVD962SA User Manual
Page 21
Rear Panel 21
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital/DTS
MAINS
FRONT
MULTICHANNEL AUDIO OUT
FRONT
CVBS
VIDEO OUT
AUDIO
OUT
S-VIDEO
Y
P
b
/C
b
P
r
/C
r
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
1
2
Y
P
b
/C
b
P
r
/C
r
PROGRESSIVE SCAN OUT
Pr/Cr Pb/Cb Y PROGRES-
SIVE SCAN OUT
Connect an optional component
video cable here and to the com-
ponent Progressive Scan Video In
jacks of a TV. Details are on pages
10, 13-14.
AUDIO OUT (Left/Right)
Connect the supplied red and white audio
cables here and to the Audio In jacks of a
television or Stereo Receiver. Details are
on pages 10-13.
MAINS jack
Connect the supplied AC
power cord here and to a
standard AC outlet to supply
power to the DVD Player.
COAXIAL (DIGITAL
AUDIO OUT)
Connect an optional audio
coaxial digital cable here
and to the coaxial digital
Audio In jack of a Stereo
Receiver. Details are on
page 14.
MULTICHANNEL AUDIO
OUT (CENTER, FRONT,
SURROUND, and SUB WF)
Connect these jacks to the corre-
sponding In jacks on your multi-
channel receiver (not supplied).
Refer to the multichannel receiver
manual for details.
CVBS VIDEO OUT
Connect the yellow video cable (sup-
plied) here and to the TV’s Video In jack.
Details are on page 12.
OPTICAL (DIGITAL AUDIO OUT)
Connect an optional audio optical cable
here and to the optical digital Audio In jack
of a Stereo Receiver. Details are on page 14.
When the OPTICAL jack is not in use,
replace its protective cap.
S-VIDEO (VIDEO OUT)
Connect an optional S-Video
cable here and to the S-Video
In jack of a television. Details
are on page 11.
•
Do not touch the inner pins of the jacks on
the rear panel. Electrostatic discharge may
cause permanent damage to the unit.
Caution
Pr/Cr Pb/Cb Y VIDEO OUT
Connect an optional component
video cable here and to the com-
ponent Video In jacks of a TV.
Details are on pages 10, 13-14.