Philips DVP5900-37 - Manual (Page 39)

English
39
Troubleshooting
(continued)
Need Help? Visit us at www.philips.com/support
Problem Solution
Picture freezes momentarily – Check the disc for fingerprints/scratches and
during playback clean with a soft cloth wiping from center to edge.
No return to start-up screen when – Reset the unit by switching the player off, then on
disc is removed again.
The player does not respond to – Aim the Remote Control directly at the sensor
the Remote Control on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
Buttons do not work – To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
Player does not respond to some – Operations may not be permitted by the disc.
operating commands during playback. Refer to the instructions of the disc jacket.
DVD Player cannot read – Use a commonly available cleaning CD/DVD to
CDs/DVDs clean the lens before sending the DVD Player for
repair.
Menu items cannot be selected – Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
Unable to play DivX movies – Check that the DivX file is encoded with DivX 3.11,
4.x and 5.x encoder.
No sound during DivX movies playback – The audio codec may not be supported by the DVD
player.
No HDMI output – Check the video output is HDMI enabled.
– Check the connection between the TV and the
HDMI jack of DVD player.
– See if the TV supports this 480p/576p/720p/1080i
DVD player.
Abnormal HDMI output screen – If show noise appears on the screen, it means that
TV does not support HDCP (High-bandwidth Digital
Content Protection).
Blank/ colored screen – Power off the set and wait for a while before turning
ON the set again.
01-41-DVP5900_US3 22/09/05, 2:09 PM 39