Philips DVP5900-37 - Manual (Page 20)

20
English
Getting Started
TIPS: To return to the previous menu, press OK .
To remove the menu, press SYSTEM MENU .
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
TV Display
TV Type
Video Output
Progressive
HD JPEG Mode
HDMI Output
Language Audio Track Rating Video
4:3 LETTERBOX
MULTI
YPbPr
Off
HD JPEG
Auto
NTSC
PAL
MULTI
1
Press SYSTEM MENU.
2
Press 2 repeatedly to select {Video}, then
press OK.
3
Press
3 4 to select {TV Type}.
4
Enter its submenu by pressing OK.
5
Press
3 4 to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
MULTI – Select this if the connected TV
is compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
6
Select an item and press OK.
➜
Follow the instructions show on the
TV to confirm the selection (if any).
Helpful Hints:
– Before changing the current TV
Type setting, ensure that your TV
supports the ‘selected TV Type’
system.
– If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
Language Audio Track Rating Video
CHANGING PAL TO MULTI
1. ENSURE THAT YOUR TV SYSTEM SUPPORTS
MULTI MODE
2. IF THERE IS A DISTORTED PICTURE DISPLAYED
ON THE TV, WAIT 15 SECONDS FOR AUTO
RECOVER
OK Cancel
To reset to default TV colour
system:
●
Wait for 15 seconds for auto recovery.
OR
1
Press OPEN CLOSE 0 on the DVD
system to open the disc tray.
2
Press 2 followed by SUBTITLE the
remote control.
➜
The DVD background screen will
appear on the TV.
01-41-DVP5900_US3 22/09/05, 2:08 PM 20