Philips DVP5900-37 - Manual (Page 15)

English
15
Connections
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied)
.
Optional: Connecting to an
Audio System Optional: Connecting Digital
AV Receiver
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied)
.
3
Set the DVD Player’s Digital Output to
PCM or ALL depending on the
capabilities of your Receiver (see page 33
“Digital Output”).
Helpful Hint:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
Y Cr/Pr
Cb/Pb
HDMI AUDIO
OUT
AUDIO
IN
STEREO
DIGITAL
DIGITAL
COAXIAL
OUT
CVBS
VIDEO OUT
Y Cr/Pr
Cb/Pb
HDMI AUDIO
OUT
AUDIO
IN
DIGITAL
AV Receiver
01-41-DVP5900_US3 22/09/05, 2:08 PM 15